-
Surface Mounting Box, White
Catalog # ESB-7WHSurface Mounting Box, for F/SCL Series where surface wiring is required. Use in conjunction with direct mount. Measures 10"x6"x1.3"(254x152x32 mm). -
Wire Guard for 12" Square Fixtures
Catalog # FWG-12Wire Guard for 12" floodlight. Provides protection to optical system of 12" square fixture. Attaches easily to flat lens frame with supplied #8 fasteners. Finished with an acrylic black E-coat paint. 1" space between wires. -
Wire Guard for 16" Square Fixtures
Catalog # FWG-16Wire Guard for 16" floodlight. Provides protection to optical system of 16" square fixture. Attaches easily to flat lens frame with supplied #8 fasteners. Finished with an acrylic black E-coat paint. 1" space between wires. -
Wire Guard, 12" Glass Refractor Wall Pack
Catalog # FWG-MWWire Guard for 12" Glass Refractor Wall Pack. Steel guard provides protection to optical system. Attaches easily around lens frame with supplied #8 stainless steel screws. A black acrylic E-coat finish is standard. -
Wire Guard, 16" Glass Refractor Wall Pack
Catalog # FWG-WWire Guard for 16" Glass Refractor Wall Pack.Steel guard provides protection to optical system. Attaches easily around lens frame with supplied #8 stainless steel screws. A black acrylic E-coat finish is standard. -
Internal Louver, Round Bollards
Catalog # HCLInternal Louver for use on Bollards with clear lens. Aesthetically appealing louver eliminates uplight and glare. The aluminum louver simply rests on the reflector inside the lens. DeltaGuard finish supplied with black, acrylic powder topcoat. Shipped as a one piece unit, consisting of five individual louvers with 40 degree tilt, held by three vertical posts spaced at 120 degrees. -
Polycarbonate Vandal Shield for 12" Square Flood, Area and Security Lights
Catalog # LS-1212" Clear polycarbonate vandal shield -
Polycarbonate Vandal Shield for 16" Square Floodlights, Area and Security Lights
Catalog # LS-1616" Clear polycarbonate vandal shield -
Surface Mounting Box
Catalog # SB-16Glass Lensed Wall Pack Surface Box. This die cast aluminum box has five threaded and closed 1/2" conduit entries for surface wiring. Supplied with our DeltaGuard finish with a black acrylic powder topcoat. Four #8-32 threaded stud and hex nuts included for ease of installation. Measures 11.3"L x 8"W x 1.3"H (286 x 203 x 32 mm). -
Wall Wash/Glare Shield, 12" Glass-Lensed Wall Pack
Catalog # WWS-12The diffuse aluminum shield is designed for use with direct mounted wall pack fixtures. It redirects light downward to wash the wall below and to the sides of the fixture. Eight fasteners are supplied for easy attachment of the shield to the lens frame. Exterior is finished with an acrylic black paint. Depth 2.07"



